Image shown may differ from original.
Description
The PROBA 5 is the successor of the PROBA 4 ripening controller.
The PROBA 5 is characterized by the central DIN-Rail control module, which can be mounted in a (central) switchcabinet. The operator can use the Proba 5 remotely by the VASP software or local at the ripeningroom by a touchscreen controlpanel.
With the touchscreen controlpanel (optional) it is possible to readout the room temperature and to change the set point. It is also possible to stop a program and to start the stand-by mode. This is important if the server crashes or the network is damaged. The normal operation will be taken place on the pc with VASP.
Each Proba 5 controller has got its own IP address and can be connected to a network switch, which is connected to the VASP pc. The VASP pc software should be installed on a server pc and can be used with every pc which on the network. The pc should have a browser with java.
The VASP software can control a maximum of 100 PROBA’s 5. If necessary, it is possible to make more locations. Each location can contain 100 controllers.
Ripening programs can be made by using a graph. In this graph it is very easy to make adjustments. Not only in default programs but also in running programs. Set point changes can take place with a ramp, with a step. or with a combination of these two. It is possible to make as many set point changes per day as you want.
In case of an alarm, there can made a difference between office times and out of office times. It is possible to sent the alarm message by e-mail or pushmessage by the VASP app.
The PROBA 5 meets the strong requirements of the TÜV Rheinland. We have received a TÜV Rheinland ID number for the PROBA 5. This ID number is worldwide known and means that the quality from the PROBA 5 is guaranteed en meets the strong requirements.
The PROBA 5 is characterized by the central DIN-Rail control module, which can be mounted in a (central) switchcabinet. The operator can use the Proba 5 remotely by the VASP software or local at the ripeningroom by a touchscreen controlpanel.
With the touchscreen controlpanel (optional) it is possible to readout the room temperature and to change the set point. It is also possible to stop a program and to start the stand-by mode. This is important if the server crashes or the network is damaged. The normal operation will be taken place on the pc with VASP.
Each Proba 5 controller has got its own IP address and can be connected to a network switch, which is connected to the VASP pc. The VASP pc software should be installed on a server pc and can be used with every pc which on the network. The pc should have a browser with java.
The VASP software can control a maximum of 100 PROBA’s 5. If necessary, it is possible to make more locations. Each location can contain 100 controllers.
Ripening programs can be made by using a graph. In this graph it is very easy to make adjustments. Not only in default programs but also in running programs. Set point changes can take place with a ramp, with a step. or with a combination of these two. It is possible to make as many set point changes per day as you want.
In case of an alarm, there can made a difference between office times and out of office times. It is possible to sent the alarm message by e-mail or pushmessage by the VASP app.
The PROBA 5 meets the strong requirements of the TÜV Rheinland. We have received a TÜV Rheinland ID number for the PROBA 5. This ID number is worldwide known and means that the quality from the PROBA 5 is guaranteed en meets the strong requirements.
Proba 5 Controller
Price on Request
Serienummer: 907.000413
Technical specifications
Type:
Proba 5
Housing:
Mounting plate with anodized aluminium housing
Dimensions:
308 x 191 x 100mm (whd)
Front:
Anodized Aluminium
Front connection:
Terminals on pcb
Power input:
12-15 Vdc (2A max)
Measure range:
-40/+50°C
Controls:
Touchscreen, not included
Sensor:
SM 8000 (PT-1000, 2-wire sensor, conform DIN/IEC 751), not included
Relay:
Max. 250Vac / 5A
Network:
Ethernet
Number of sensors:
3 or more
Voltage:
12 V
Housing:
Din-rail
Description
The PROBA 5 is the successor of the PROBA 4 ripening controller.
The PROBA 5 is characterized by the central DIN-Rail control module, which can be mounted in a (central) switchcabinet. The operator can use the Proba 5 remotely by the VASP software or local at the ripeningroom by a touchscreen controlpanel.
With the touchscreen controlpanel (optional) it is possible to readout the room temperature and to change the set point. It is also possible to stop a program and to start the stand-by mode. This is important if the server crashes or the network is damaged. The normal operation will be taken place on the pc with VASP.
Each Proba 5 controller has got its own IP address and can be connected to a network switch, which is connected to the VASP pc. The VASP pc software should be installed on a server pc and can be used with every pc which on the network. The pc should have a browser with java.
The VASP software can control a maximum of 100 PROBA’s 5. If necessary, it is possible to make more locations. Each location can contain 100 controllers.
Ripening programs can be made by using a graph. In this graph it is very easy to make adjustments. Not only in default programs but also in running programs. Set point changes can take place with a ramp, with a step. or with a combination of these two. It is possible to make as many set point changes per day as you want.
In case of an alarm, there can made a difference between office times and out of office times. It is possible to sent the alarm message by e-mail or pushmessage by the VASP app.
The PROBA 5 meets the strong requirements of the TÜV Rheinland. We have received a TÜV Rheinland ID number for the PROBA 5. This ID number is worldwide known and means that the quality from the PROBA 5 is guaranteed en meets the strong requirements.
The PROBA 5 is characterized by the central DIN-Rail control module, which can be mounted in a (central) switchcabinet. The operator can use the Proba 5 remotely by the VASP software or local at the ripeningroom by a touchscreen controlpanel.
With the touchscreen controlpanel (optional) it is possible to readout the room temperature and to change the set point. It is also possible to stop a program and to start the stand-by mode. This is important if the server crashes or the network is damaged. The normal operation will be taken place on the pc with VASP.
Each Proba 5 controller has got its own IP address and can be connected to a network switch, which is connected to the VASP pc. The VASP pc software should be installed on a server pc and can be used with every pc which on the network. The pc should have a browser with java.
The VASP software can control a maximum of 100 PROBA’s 5. If necessary, it is possible to make more locations. Each location can contain 100 controllers.
Ripening programs can be made by using a graph. In this graph it is very easy to make adjustments. Not only in default programs but also in running programs. Set point changes can take place with a ramp, with a step. or with a combination of these two. It is possible to make as many set point changes per day as you want.
In case of an alarm, there can made a difference between office times and out of office times. It is possible to sent the alarm message by e-mail or pushmessage by the VASP app.
The PROBA 5 meets the strong requirements of the TÜV Rheinland. We have received a TÜV Rheinland ID number for the PROBA 5. This ID number is worldwide known and means that the quality from the PROBA 5 is guaranteed en meets the strong requirements.
| Download | Label | Description | Type | Size |
|---|---|---|---|---|
| Download | Proba 5 Controller | Handleiding Nederlands | 3 MB | |
| Download | Proba 5 Controller | Handleiding Nederlands (2) | 10.5 MB | |
| Download | Proba 5 Controller | Manual English | 3.1 MB | |
| Download | Proba 5 Controller | Manual English (2) | 10.4 MB | |
| Download | Proba 5 Controller | Handbuch Deutsch | 2.7 MB | |
| Download | Proba 5 Controller | Handbuch Deutsch (2) | 10 MB | |
| Download | Proba 5 Controller | Manuel Français | 3.1 MB | |
| Download | Proba 5 Controller | Manuel Français (2) | 10.5 MB | |
| Download | Proba 5 Controller | Manual Español | 3.2 MB | |
| Download | Proba 5 Controller | Manual Español (2) | 10.4 MB | |
| Download | Proba 5 Controller | Manual Portugues | 3.1 MB | |
| Download | Proba 5 Controller | Manual Portugues (2) | 10.5 MB | |
| Download | Proba 5 Controller | Handleiding Russisch | 3.3 MB | |
| Download | Proba 5 Controller | Handleiding Russisch (2) | 10.7 MB |